Driveway Concrete Construction Basics

Concrete construction requires flexibility and capacity. You need to hire a concrete driving contractor to get things done. Installing concrete driveways is a common thing for homes. While it has a short duration and a lifetime, a qualified and knowledgeable concrete contractor needs to build it to stand time. Homeowners will discover that many local contractors want to build a new concrete road from scratch.   

Many driveway entrepreneurs will give you a quick quote, but before a project starts, you should have a good insight into how much you’ll spend on the driveway. Ask about your future project from a highly experienced contractor. Be sure that you throw them questions about the driveway.  

Concrete Driveway Construction  

Estimate roughly how long the job would complete and ask advice as to how long it will take to get the new concrete driveway ready. Usually, it’s four weeks before the concrete’s maximum strength is achieved. Many experts suggest that they can be ready in two weeks if done right. So, when the contractor says two weeks, you may believe him.  

Concrete driveways are notorious for cracking, especially when they are poured prematurely. A skilled driveway contractor is fully aware of the causes of why these cracks occur and avoid them. The contractor should also understand how the water affects the concrete. More water added to the mixture means that the concrete will crack more. Only the right amount should be used to decrease and reduce the risk of cracking. 

Hiring Skilled Driveway Contractors 

Driveway contractors must understand the function of the control joints to the concrete in order to avoid cracks. It is not so easy to install a concrete driveway. In order to ensure that it is installed well, the contractor should first compact the ground and then fill it. The surface must be made of packed crushed materials.  

Many cities require rebar grids in stainless steel for electricity. Many contractors provide them with stability advice. Concrete works should be done on a warm or sunny day. When it rains or if there’s snow on the ground, no competent contractor will consider making a pour. 

Concrete Driveway Repairs 

In case of disaster, ask the driveway contractor as to what they will do. They should give you some good advice so that those problems can be avoided. For example, be sure that the concrete can carry the weight that is placed over it or it will a crack. 

A pro driveway contractor often works to repair the damage after the installation. But to be sure, make sure that this is included in the contract, as well as other situations in which the contractor should do some follow up. It is important that you know what they’ll do in these cases.  

The construction of new concrete driveways requires precision, persistence, and experience. If you ask the correct questions and carefully evaluate the competence of a contractor, you will avoid a lot of problems. Don’t hire amateurs as you won’t be sure of the results. You’ll always benefit from hiring a professional concrete contractor Bay Area

How to Care for Parking Lot and Driveway Asphalt

Each important and substantial home renovation project requires your full attention. Regular maintenance is necessary for asphalt, regardless if it is installed on the driveway or parking lot. Your maintenance costs will be lower if you do a routine examination of the asphalt surface. But if there are small irregularities and you leave it unchecked for a long time, then you can’t expect to get your driveway or parking lot paving to last you 20 years.  

There are certain things that a licensed asphalt paving contractor could do to ensure that your asphalt pavement is cared for at all times. Here are some of the methods or techniques that they do to ensure that: 

1. Thorough inspection  

A thorough inspection of the asphalt driveway means that its moisture level is checked during summer. When the sun strikes the asphalt, it is supposed to evaporate all its moisture. If it is summer and the moisture content of your pavement is too low, then you have a problem, as it will produce hairline cracks on the surface later on. If those are not addressed, then they will turn into huge potholes. Your pavement must also be checked during the winter. Water should not enter those small cracks because when water freezes, it will widen those cracks. Extra care must be taken when it’s very cold or very hot outside.   

2. Weather checking  

Given the consideration above, paving contractors should always check the surface temperature of the pavement. It must be over 55 degrees to ensure good bonding of the blacktop material. That’s also the ideal time to do some re-sealing. Do not reseal the asphalt if there’s a chance that it will rain. Water would only wash out the sealing.   

3. Surface preparation  

This is an important task when it comes to asphalt installation. Even if you did a good job of installing asphalt, if the surface is not prepared correctly, then all your work would have been in vain. A dirty surface means trouble later on. It will only allow weed or grass to grow. It may also become a reservoir of oil and mud. Paving contractors can help you out in correcting these problems if you notice them on your driveway or parking lot.  

4. Cold mix application  

Driveways with tiny holes should be filled out with a cold mix. The inner holes must be cut with a chisel while the rough edges are covered. The use of a patching compound is recommended, and it must be layered at the right size and thickness.   

5. Sealant application  

Huge depressions and cracks are not to be repaired by cold mixes. Instead, they should be treated with sealants. Remove all loose debris and clean the surface of dust. Then, pour the sealant to the level of the driveway. Let the substance to settle, following the manufacturer’s specifications.   

6. Ongoing maintenance  

When all the necessary repairs have been done, then what’s left is providing ongoing care to the asphalt driveway or parking lot. Caring for your driveway or parking lot paving is your responsibility. You have to do it to preserve the look of your property and to avoid expensive repairs in the future. 

What You Should Know about Paving

Paving consists of a stone or tile and a mortar system. It is usually installed on a surface, usually on the ground or an outdoor structure of a home or building. Good examples of paving materials are the flagstones used in gardens. However, there are other types of paving known today, and asphalt paving is one of them.  

Paving was used for many years now. Aside from asphalt, the other popular material used for paving is concrete. Apparently, a couple of thousand years before, the Romans built roads using pavers and aggregates. They have a function for years and some of them are still existing today. This is how you know that these materials are very durable.   

Today’s Paving Process  

Homeowners are advised never to neglect the exteriors of their homes. Otherwise, they will have to spend lots of time and money repairing. Even if the exteriors have been repaired, it won’t have the same impact as before.   

What other people see is the exterior of your house. It is only reasonable that you have to improve it as much as you can. If your property isn’t maintained well from the outside, then it’s impossible to say that it’s beautiful inside. This is the reason why a lot of people invest in their landscapes. You want to impress everybody who passes by your home.   

Investing on Your Home Exteriors  

If you’re like many people who spend lots of time on their gardens and lawns, then you might want to invest in asphalt pavement. Installing on your driveway will encourage the children to go out and play instead of sit all day tinkering on their phones or playing with the computer. If your backyard looks appealing,  then even you will enjoy staying outside.   

Create paved areas in your home. A large part of your landscape may be thee paved asphalt driveway. You can also use other paving materials t edge garden beds and build patios. If you think that this is expensive to construct, think again. It’s worth the investment because it cuts the green areas of your garden in half. It means that your landscape becomes easier to maintain in the long run.    

It is just a matter of designing your exteriors in such a way you can integrate the paved areas with the greens and the other elements of your landscape. Your landscape designer can show you a wide range of designs and styles to choose from and give you great suggestions as to what to do with your exteriors. 

What to Ask a Paving Contractor  

You should seek the answer a few questions before starting any outdoor paving projects. It won’t matter if it’s a paved patio, asphalt driveway, garden edges, barbeque area, or flagstone paver that you intend to install. You have to talk with the expert in Bay Area paving before doing anything.  

On the other hand, the contractor may also ask you their own set of questions, such as how big the project area is and what designs you prefer. If it is an asphalt paving project, they might want to know where you want it installed so they can assess what foundation to use and how to prepare for the installation.  

Asphalt Pavement Installation Basics

There are different types of HMA mixes available, with some measures that have to be taken and done meticulously to arrive at the right selection. The contractor will contact the asphalt mix supplier to create a mixture appropriate for positioning the asphalt thickness. Take note that stony mixes are not the best options for certain applications. The same goes true for mixes that contain specialty materials. 

Traditional compact blends are the ones ideal for parking lots and driveways. The use of more sand offers a better water shedding pad. It also makes the mix lightweight. However, if you intend to mix the asphalt, ensure that the contractor buys the mix from reputable local suppliers.  

Contractors would definitely have their favorite recipes that worked well for them before. If you are not familiar with asphalt pavements, it is best that you ask them to give you a sample of how the finished work will look like so that you get the matte and mixture that suits your requirements.  

Compacting and Paving Techniques  

Ensure that the subgrade of the asphalt pavement is stable before starting the paving process. It’s important for the soil and backfilled areas to be well compacted. Any settlement should have occurred at this point. Drive a dump truck or a loaded vehicle over it to make sure that the work platform is secure and stable. Upon the completion of the subgrade, the next step is to assemble, form, and compact the aggregate base.    

Paving must only be undertaken only if the weather condition is good. Don’t do any work if it’s cold or snowy outside. Proper compaction is important to the future performance of the pavement, and you won’t do a good job during wet and cool weather. You have to use the right compacting equipment as well.  

Contractor Responsibilities  

Ensure that the contractors are working closely with their chosen suppliers to monitor the HMA temperature. It must never be overheated or damage can be expected. The mixture temperature must be maintained throughout the compaction process.  

To order to prevent segregation, the contractor must also monitor the handling and location of the materials used during the entire project. Doing so should improve workmanship. Use a paving machine for the job. 

Asphalt Maintenance  

Your asphalt driveway investment must be safeguarded. Driveways and parking lots have to be maintained well to prevent drainage problems, to provide edge protection, and to repair the paved surface. 

Water spells trouble for asphalt pavements. Every low position known as the water pool must be corrected with a patching mixture. Ditches, drain inlets, and gutters should be open and clear. 

Asphalt Sealing  

The bottom of the asphalt pavement must be protected with aggregates or soil wedges. Curb blocks may also be utilized to discourage vehicles from driving very close to the edges of the pavement. 

If possible, seal the asphalt pavement. A seal makes the surface water-resistant. Sealing provides not just waterproof coating but also a uniform look. Read all the technical details of the asphalt pavement supplier to be guided accordingly. Consult with an expert in asphalt paving Bay Area to get further assistance. 

The Basics of Asphalt Pavement Installation

The proper installation and maintenance of asphalt pavement will last you for 20 years. That’s the secret of the professionally built driveway. Driveways that are poorly designed and constructed will break down soon after it was installed. Commercial parking lots have a similar service life. 

Aside from engineering decisions such as construction materials and design details, there are other management choices that have a significant impact on asphalt paving’s performance. It also includes finding the right contractor and checking job quality. 

How to Select a Contractor  

Selecting good contractors takes some work, but it is for superior results. You must find a competent and skilled contractor who takes care of all the specifics of the project. You may have to speak to several trustworthy contractors to get the expected results. Consult with the Better Business Bureau to check for possible customer complaints.  

Tell the contractors to give you references, preferably their latest projects. Call their previous clients and inquire if they’re pleased with the contractor’s job. If necessary, check the jobs and consider the work quality. 

Another good way to find an asphalt contractor is to contact the hot mixing plant in your locality and request for a recommendation from them. The operator will definitely know a good contractor or two, and they would willingly give their name and contact number. Research first and find out if the contractor suggested to you is indeed good enough. It is important to make sure that the recommended contractor does a good job. 

Contracts and Documents  

It is also important to give the asphalt paving contractor a contract before starting with the job. They should provide you with written documentation about the nature of the job and its expected quality.  

However, very few projects on the road will follow these guidelines. They usually provide simple specifications and follow the standards to ensure you of a good job. Although it isn’t long, it must be clear and precise. All test guidelines must be met.  

Structural Design Considerations 

An asphalt pavement needs adequate structural capacity so it can carry the load you want it to and operate well. The appropriate thickness of the pavement will depend on the condition of the subgrade and the expected traffic. 

Proper subgrade preparation is essential, as it will serve as the pavement base. It should be free of soil and weeds. It must match the contours of the asphalt pavement. It needs to be lightweight, smooth, and spotless. All soft spots must be filled and properly compacted and covered with good soil. A poorly compacted or porous subgrade may lead to structural problems. 

Drainage Installation  

The installation of suitable drainage is a factor in the performance of the asphalt driveway or parking lot. Perhaps no other role is so crucial in assessing the ability of the asphalt pavement to cope with weather and road impact. Evaporation or runoff is generally slow as the water gets into the subgrade. Even under the dry weather, it may stay wet or become damp at an indefinite period of time. Some subgrade soils have some clay and silt that cause it to lose strength, especially when wet.